To Download As A Word Document Click Here

HOPE CHANNEL, 3ABN (THREE ANGEL'S BROADCASTING NETWORK), Christian

A STEP BY STEP TUNING GUIDE FOR

DSTV DECODERS - DSD 660 • 720i • 910 .990. 1110(+2) & DUAL VIEW

FREQUENCIES CAN BE USED ON VIVID AND (FTA) FREE TO AIR DECODERS

A. HOPE CHANNEL SETTINGS -

1.  Press "TV" button on your DSTV remote and move down to PUBLIC PAS 7/10 and press "OK".

2.  Press "MENU" button and move down to ADV ANCED OPTIONS and press OK.

3.  On DISH INSTALLATION select and press OK. Enter pin code: 9949

4.  On DISH INSTALLATION MENU, move down to NETWORK 2, Press OK.

5.  If satellite is disabled, ENABLE it by moving the right arrow on your remote to DSTV PAS 7/10.

6.  Move down to FREQUENCY and press OK. Enter the digits 12722 and press OK.

7.  Change the SYMBOL RATE to 26657 and press OK.

8.Move down to FEC and use the right arrow to change to 1/2. 9. The POLARITY is VERTICAL.

9.     USE NIT is YES.

10. Move down to ACCEPT ALL DISPLA YED SETTINGS AND V ALUES and press OK.

B. FOR 3ABN SETTINGS -

REPEAT STEPS 4 -11 ON NETWORK 3.

FREQUENCY -12682/3 SYMBOL RATE - 26652 FEC - 1/2

POLARITY - HORIZONTAL


 



12. When done on DISH INSTALLATION, move down to SCAN ALL NETWORKS and press OK. (Scanning will take a few minutes.)

13. Press the TV button and move down to PUBLIC PAS 7/10 and move the p+ or P- button on your remote to search

for the Christian Channels.

14. To get back to DSTV, press the TV button and move the up or down arrow button on your remote to DSTV. Press OK. Press the p+ or P- button to scroll through the DSTV channels.

On Vivid Or Other Decoders I Receivers

If you use a small (preferably 90cm) dish and LNB (as for DSTV), Hope Channel may be received on a (FTA) Free-to-Air digital receiver using the parameters below:

Satellite: PAS-10 Ku-band:

Frequency: 12.722 Ghz, Polarization: Vertical, Symbol rate: 26657 Msps, FEC: ½

For technical help, call your installer first.

If you need further help, email: Techinfo@hopetv.org or phone +27 (0)11-805-2803

 

 

Important!! If the above does not work. do a factorv default scan and repeat the steps or 20 back to step no.4 and go to Network l (Home Network). Then change the LNB HIGH FREQUENCY to 10600. Or If it is 10600 change it to 10700. And then repeat all the steps from step 4 onwards. Please Do not Hesitate to call me on 0724363081, if vou still encounter any problems. 

Events

No upcoming events